IoT Hardware
SEM – Smart Energy Manager
SEM is a compact and highly capable monitoring and control device for commercial, industrial and utility based energy management applications. It supports most of the common industrial communication protocols ( Modbus, IEC104, IEC62056 etc.) as well as those being used for IoT applications (REST, MQTT,CoAP etc.). Owing to its embedded click-on communication board, you can choose any type of media over GSM, Wi-fi, Ethernet, Zigbee or Lora. SEM’s power measurement feature provides monitoring of two three-phase circuits simultaneously with a sampling rate of 3.2kHz. Besides, it has an SD Card option up to 32GB to restore data even if there is a loss of communication. Its embedded and expandable digital inputs and outputs make it very easy to have more information from other communicable devices opening the door to a world of connectivity and control.
- GSM, Wi-fi, Ethernet, Zigbee or Lora Connection
- 3P + N (3 Phase and Neutral) Voltage Channel
- 2 x 3P (Either 3 Phases or 6 Single Phases) Current Channels
- Modbus-RTU (Slave), IEC60870-5-104, IEC62056-21 Protocols
MCU++ Master Controller Unit
MCU++ series is an advanced compact industrial controller based on a 32-bit 454 MHz ARM CPU. With the power of Linux OS, the user can keep application development quick and simplified. MCU++ can take almost any role in remote utility applications such as solar power plants and electricity distribution substations. It combines GPRS/GSM modem, WiFi and Bluetooth, also digital inputs, outputs and datalogger in a single device. Device with built-in 2 digital inputs and outputs and has two ethernet and serial communication ports for flexible connectivity to SCADA, field devices and remote control systems.
- CPU ARM 926 EJ-S 32 Bit 454 Mhz Cpu
- 4 Digital Input Channels
- Giriş Voltaj Aralığı 0 - 36 VDC / 0 - 150 VDC / 0 - 250 VAC
- Digital Output Channels 2 (Type Dry-Contact)
- Max. Output Current 2A
- GPRS/GSM modem, WiFi/Ethernet and Bluetooth Connection
DIO Digital Input Output
DIO (Digital Input/Output) Module can display on/off or 1/0 data for up to 16 channels. Input channels with high impedance reduce the input current and noise immunity is increased through hysteresis. The device has a anti-jumping filter to prevent contact from jumping. The device also has 32 bit change registers and these registers display the level changes in the input channels. DIO (Digital Input/Output) has 8 channels of isolated solid state relay output. Output channels are isolated from each other. The output type can be changed to latch or unlatch output with the specified time.
The user can configure input polarities, anti-jumper filter time, serial communication port settings and output latch time easily through DIO user interface. User can also turn the “Test Mode” on the module. All the inputs and outputs are adjustable for site tests in the “Test Mode”.
- ARM Cortex-M4 32 Bit 84 MHz CPU
- 16 Input Channels
- Input Voltage Range 0 – 36 VDC / 0 – 150 VDC
- 8 Output Channels (Type Dry-Contact)
- Support for Modbus-RTU Protocols
PMU – Power Meter Unit
Inavitas PMU (Power Meter Unit) is a new generation network analyzer that measures and enables real time monitoring of energy parameters. Inavitas PMU (Power Meter Unit) monitors up to 5 channel three phase circuits or 15 channel single phase circuits or any combination of single or three phase circuits. This flexibility makes Inavitas PMU perfect for multi-tenant facilities such as distribution substations, office buildings, data centers and shopping malls. The user can monitor all energy parameters in real time and configure current and voltage polarities, transformer ratios and serial communication settings easily via Inavitas PMU user interface software.
- ARM Cortex-M4 32 Bit CPU
- 3-Wired (A, B, GND), Semi Duplex Connection
- 3P + N (3 Phase Voltage and Neutral) Voltage Channels
- 5 x 3P (Either 15 Phases or 6 Single Phases) Current Channels
- IEC 61000-4-30 Class S Accuracy
